Working With Garments CAD
Course type: Basic
Course Duration: 80 hours
Classes: 16 classes in 1 month
Course Objectives:
- This course is specially designed to provide technical knowledge and skills to cope with the requirement of Computer Aided Design of Apparel Section of Textile Sector. The course will be implemented to ensure at least 80% of total contact hours on practical/hands on skills training or practice and 20% trade/ occupations related theory including OHS and soft modules.
- The course is designed to enable trainees to acquire a range of technical and vocational, practical, personal and organizational skills valued and utilized both within and beyond the workplace.
- The course is designed to meet the required competencies of the occupations needed in the labor market in and outside the country.
Course Outline
| Name of the Course |
Duration of Course |
Entry Qualification |
|
| Quality Control in Knitting | Total Duration = 80 hrs 1. Generic Skills= 2 hrs 2. Occupation Specific knowledge(trade theory) =14 hrs 3. Occupation Specific Skills(practical/demonstration)= 64 hrs |
1. Age minimum = 18 yrs
2. Education = SSC/HSC passed |
|
I. Requirement of Competencies for the Targeted Occupations in the Job market
- Primary Knowledge on Different Garments CAD System
- Knowledge on Lectra Modaris Software
- Knowledge on Diamino Software
II. Competency Level: Basic Skilled Worker Level 1/Medium-Skilled Worker Level 2
III. Student Assessment Method
- Class Test( oral & practical based on achievement of competencies , once every 7 days)
- Monthly Test( oral & practical, once every 30 days)
- Final Test ( oral and practical based on achievement of competencies outlined for the course )
- Final Test to be conducted by Industry Assessors and institutional Trainers to assess the skills received during training
IV. IndustryAssessor Requirements
Assessor to conduct assessment must meet the following requirements
- Trainer (from other institution) or practitioner in the trade area at least for five(5) years
- Trainer(from other institution) or practitioner should be certified by BTEB/ISC/industry association (BTMA)
- One assessor can assess maximum 6 (six) Trainees a day
V. Certification System
- Certification will be done based on the assessment report from Industry Assessors and marks obtained from weekly, monthly and final test /assessment.
Time Distribution
|
Module No |
Job Focused Module |
Allocated Time(Contact Hours) |
||
|
Occupation Specific Knowledge (trade theory) in hrs |
Occupation Specific Skills(Practical) in hrs |
Total in hrs |
||
| 1. | Introduction to Apparel CAD System |
4 |
16 |
20 |
| 2. | Working with Lectra Modaris |
6 |
24 |
30 |
| 3. | Working with Lectra Diamino |
6 |
24 |
30 |
|
Time allocation |
20% |
80% |
100% |
|
|
Weekly Assessment |
30 Mins |
1 Hours |
4.5 Hours |
|
|
Final Assessment |
30 Mins |
2 Hours |
2.5 Hours |
|
|
Total hrs |
80.00 Hours |
|||
Module 1: Introduction to Apparel CAD System
Total Duration: 20 Hrs
| Sl No | Unit Code | Unit of Competency (UoC)Title |
UoC Level |
Nominal Duration in hrs |
| Generic- Compulsory | ||||
| SIEP-WGC-001 | Apply technical terms in the workplace | Level 1, Level 2 |
40 Minutes |
|
| Occupation Specific Knowledge(trade theory) –Compulsory | ||||
| SIEP-WGC-002 | CAD and CAM | Level 1, Level 2 |
50 Minutes |
|
| SIEP-WGC-003 | Necessary Hardware and Software | Level 1, Level 2 |
50 Minutes |
|
| SIEP-WGC-004 | Available CAD for Apparel Industry | Level 1, Level 2 |
50 Minutes |
|
| SIEP-WGC-005 | Comparative Study on Different Brands | Level 1, Level 2 |
50 Minutes |
|
| Occupation Specific Skills(practical/demonstration)- Compulsory | ||||
| SIEP-WGC-006 | Introduction to Lectra Workplace | Level 1, Level 2 |
16 Hours |
|
Module 2: Working with Lectra Modaris
Total Duration: 30 Hrs
| Sl No | Unit Code |
Unit of Competency (UoC)Title |
UoC Level | Nominal Duration in hrs |
| Generic Compulsory | ||||
| SIEP-WGC-007 | Understanding Technical Terms regarding Garments CAD | Level 1, Level 2 |
0.40 |
|
| Occupation Specific Knowledge(trade theory) –Compulsory | ||||
| SIEP-WGC-008 | Understanding Size Table, Style and Layer | Level 1, Level 2 |
0.40 |
|
| SIEP-WGC-009 | Working with Line Tools | Level 1, Level 2 |
0.40 |
|
| SIEP-WGC-010 | Working with Points and Curves | Level 1, Level 2 |
0.40 |
|
| SIEP-WGC-011 | Working with Sewing Allowance | Level 1, Level 2 |
0.40 |
|
| SIEP-WGC-012 | Grading Basics | Level 1, Level 2 |
0.40 |
|
| SIEP-WGC-013 | Working with Grading | Level 1, Level 2 |
0.40 |
|
| SIEP-WGC-014 | Piece extraction, Doubling | Level 1, Level 2 |
0.40 |
|
| SIEP-WGC-015 | Creating Variant and Exporting | Level 1, Level 2 |
0.40 |
|
| Occupation Specific Skills(practical/demonstration)- Compulsory | ||||
| SIEP-WGC-016 | Understanding the User Interface | Level 1, Level 2 |
3.0 |
|
| SIEP-WGC-017 | Understanding Size Table, Style and Layer | Level 1, Level 2 |
3.0 |
|
| SIEP-WGC-018 | Working with Line Tools | Level 1, Level 2 |
3.0 |
|
| SIEP-WGC-019 | Working with Points and Curves | Level 1, Level 2 |
3.0 |
|
| SIEP-WGC-020 | Working with Sewing Allowance | Level 1, Level 2 |
3.0 |
|
| SIEP-WGC-021 | Grading Basics | Level 1, Level 2 |
3.0 |
|
| SIEP-WGC-022 | Working with Grading | Level 1, Level 2 |
3.0 |
|
| SIEP-WGC-023 | Piece extraction, Doubling | Level 1, Level 2 |
1.30 |
|
| SIEP-WGC-024 | Creating Variant and Exporting | Level 1, Level 2 |
1.30 |
|
Module 3: Working with Lectra Diamino
Total Duration: 30 Hrs
| Sl No | Unit Code |
Unit of Competency (UoC)Title |
UoC Level | Nominal Duration in Hrs |
| Occupation Specific Knowledge( Trade theory) –Compulsory | ||||
| SIEP-WGC-025 | Understanding Technical Terms regarding Diamino, User Interface and Access Path | Level 1, Level 2 |
6.0 |
|
|
Occupation Specific Skills(practical/demonstration)- Compulsory |
||||
| SIEP-WGC-026 | Defining Access Path and Importing Variant | Level 1, Level 2 |
6.0 |
|
| SIEP-WGC-027 | Marker Configuration in Diamino | Level 1, Level 2 |
6.0 |
|
| SIEP-WGC-028 | Manual Marker Making in Diamino | Level 1, Level 2 |
6.0 |
|
| SIEP-WGC-029 | Automatic Marker Making in Diamino | Level 1, Level 2 |
6.0 |
|
List of Jobs to Achieve UoC:
| SL |
Name of the Job |
Time Allocated |
Time of implementation |
|
1. |
Understanding the User Interface |
1.0 |
1st Week |
|
2. |
Understanding Size Table, Style and Layer |
2.0 |
1st Week |
|
3. |
Working with Line Tools |
2.0 |
2nd Week |
|
4. |
Working with Points and Curves |
2.0 |
3rd Week |
|
5. |
Working with Sewing Allowance |
0.5 |
4th Week |
|
6. |
Grading Basics |
1.5 |
4th Week |
|
7. |
Working with Grading |
2.0 |
5th Week |
|
8. |
Piece extraction, Doubling |
1.0 |
6th Week |
|
9. |
Creating Variant and Exporting |
1.0 |
6th Week |
|
10. |
Defining Access Path and Importing Variant |
1.0 |
7th Week |
|
11. |
Marker Configuration in Diamino |
1.0 |
7th Week |
|
12. |
Manual Marker Making in Diamino |
1.5 |
7th and 8th Week |
|
13. |
Automatic Marker Making in Diamino |
1.5 |
8th Week |