Preparatory Process in Weaving

Course type: Basic
Course Duration: 80 hours
Classes: 16 classes in 1 month
Course Objectives:
- This course is specially designed to provide technical knowledge and skills to cope with the requirement of primary knowledge on quality control weaving technology and inspection machine operation. The course will be implemented to ensure at least 80% of total contact hours on practical/hands on skills training or practice and 20% trade/ occupations related theory including OHS and soft modules.
- The course is designed to enable trainees to acquire a range of technical and vocational, practical, personal and organizational skills valued and utilized both within and beyond the workplace.
- The course is designed to meet the required competencies of the occupations needed in the labor market in and outside the country.
Course Outline
Name of the Course |
Duration of Course |
Entry Qualification |
|
Preparatory Process in weaving |
Total Duration = One months/ 80 hrs 1. Generic Skills= 4 hrs 2. Occupation Specific knowledge(trade theory) =12 hrs 3. Occupation Specific Skills(practical/demonstration)= 64 hrs |
1. Age minimum = 18 yrs
2. Education = SSC (Fill up from Main Sheet) passed |
I.Requirement of Competencies for the Targeted Occupations in the Job market
- Primary Knowledge on woven fabric quality
- Knowledge on inspection system
- Knowledge on quality control system
II. Competency Level : Basic Skilled Worker Level 1
III. Student Assessment Method
- Class Test( oral & practical based on achievement of competencies , once every 7 days)
- Monthly Test( oral & practical, once every 30 days)
- Final Test ( oral and practical based on achievement of competencies outlined for the course )
- Final Test to be conducted by Industry Assessors and institutional Trainers to assess the skills received during training
IV. Industry Assessor Requirements
Assessor to conduct assessment must meet the following requirements
- Trainer (from other institution) or practitioner in the trade area at least for five(5) years
- Trainer(from other institution) or practitioner should be certified by BTEB/ISC/industry association (BTMA)
- One assessor can assess maximum 6 (six) Trainees a day
V. Certification System
- Certification will be done based on the assessment report from Industry Assessors and marks obtained from weekly, monthly and final test /assessment.
Time Distribution
Module No |
Job Focused Module |
Allocated Time(Contact Hours) |
||
Occupation Specific Knowledge (trade theory) in hrs |
Occupation Specific Skills(Practical) in hrs |
Total in hrs |
||
1. | Introduction to quality control |
4 |
20 |
24 |
2. | Quality control in weaving |
6 |
22 |
28 |
3. | System of quality control and testing |
6 |
22 |
28 |
Time allocation |
20% |
80% |
100% |
|
Weekly Assessment |
30 Mins |
30 Mins |
3.0 Hrs |
|
Monthly Assessment |
1 Hour |
1.5 Hour |
2.50 Hours |
|
Final Assessment |
1 Hour |
1.5 Hour |
2.50 Hours |
|
Total hrs |
80 Hours |
|||
Module 1: Introduction to weaving preparatory and winding
Total Duration: 24.0 Hrs
Sl No | Unit Code | Unit of Competency (UoC)Title | UoC Level | Nominal Duration in hrs |
Generic- Compulsory | ||||
SIEP-QCW-001 | Apply OHS practices in the workplace | 30 mins | ||
SIEP-QCW-002 | Apply technical terms in the workplace | 15 mins | ||
SIEP-QCW-003 | General idea utility | 15 mins | ||
Occupation Specific Knowledge(trade theory) -Compulsory | ||||
SIEP-QCW-004 |
Understanding quality control and weaving process |
1 hr | ||
SIEP-QCW-005 |
Knowledge on different standards |
1 hr | ||
SIEP-QCW-006 |
Understanding Inspection machine operation and components |
1 hr | ||
Occupation Specific Skills(practical/demonstration)- Compulsory | ||||
SIEP-QCW-007 | Solving practical problem with woven fabric quality | 10 hrs | ||
SIEP-QCW-008 | Implementation of different standard in woven fabric | 5 hrs | ||
SIEP-QCW-009 | Physical demonstration of inspection machine | 5 hrs | ||
Module 2: Quality control in weaving
Total Duration: 28 Hrs
Sl No | Unit Code |
Unit of Competency (UoC)Title |
UoC Level | Nominal Duration in Hrs |
Occupation Specific Knowledge( Trade theory) –Compulsory | ||||
SIEP-QCW-010 | Understanding faults due to yarn | 1 hr | ||
SIEP-QCW-011 | Understanding faults due to weaving | 2 hrs | ||
SIEP-QCW-012 | Knowledge on mending | 1 hr | ||
Occupation Specific Skills(practical/demonstration)- Compulsory | ||||
SIEP-QCW-013 | Physical demonstration on different yarn faults in woven fabric | 8 hrs | ||
SIEP-QCW-014 | Physical demonstration on different fabric faults | 8 hrs | ||
SIEP-QCW-015 | Physical demonstration on mending system | 6 hrs | ||
Module 3: system of quality control and testing
Total Duration: 28 Hrs
Sl No | Unit Code |
Unit of Competency (UoC)Title |
UoC Level | Nominal Duration in hrs |
Generic Compulsory | ||||
SIEP-QCW-016 | Apply OHS practices in the workplace | 20 mins | ||
SIEP-QCW-017 | Precaution at machine operation | 20 mins | ||
SIEP-QCW-018 | Introduction to different accidents in weaving shed | 20 mins | ||
Occupation Specific Knowledge(trade theory) –Compulsory | ||||
SIEP-QCW-019 |
Understanding 4 point system |
6 hrs | ||
SIEP-QCW-020 |
Understanding 10 point system |
6 hrs | ||
SIEP-QCW-021 |
Understanding different fabric testing |
10 hrs | ||
Occupation Specific Skills(practical/demonstration)- Compulsory | ||||
SIEP-QCW-022 | Implementation of 4 point system in woven fabric inspection | 1 hr | ||
SIEP-QCW-023 | Implementation of 10 point system in woven fabric inspection | 1 hr | ||
SIEP-QCW-024 | Practical on dimensional stability of fabric | 1 hr | ||
SIEP-QCW-025 | Practical on tensile strength test | 1 hr | ||
SIEP-QCW-026 | Practical on tearing strength test | 1 hr | ||
SIEP-QCW-027 | Practical on abrasion resistance test | 1 hr | ||
SIEP-QCW-028 |